EMBROIDERY GUIDES · PATCHES · SMALL BATCH
Embroidery that looks hand-made, not machine-made.
Practical, tested guides for patches, stabilizers, thread, text and small-batch production — plus StitchForge, our digitizing studio for makers.
- Clear settings, not vague advice
- Built for real hoops and real fabric
- No sponsored fluff
START HERE
Good embroidery is a chain of small decisions.
Pick the right fabric, support it properly, then choose a stitch that can actually hold the detail you want.
Choose the artwork
Thick shapes, strong contrast and 4 mm+ lettering survive the needle. Hairlines and gradients belong in print.
Support the fabric
A stable hoop and the right stabilizer matter more than a fancy stitch angle. Stretch is the enemy of registration.
Plan the stitch path
Tatami for coverage, satin for edges, underlay for lift. The preview should show the real path, not a print.
FEATURED GUIDES
Read this before your next sew-out.
How to make an embroidered patch that survives the wash
Borders, backing, density and the finishing details that stop a patch from curling.
Tatami vs. satin stitch: when to use each
Coverage, sheen, edges and the places where the wrong choice shows immediately.
The 4 mm rule: why small text fails in embroidery
What actually happens below 4 mm — and the honest alternatives that still look sharp.
A USEFUL SHORTCUT
If the text is under 4 mm, change the production method — not the font.
WHY PLAN & MAKE
Less guessing. More sewing.
We publish the settings, trade-offs and failure points that usually get left out of embroidery tutorials. When a design needs a different production route, we say so.
About Plan & Make →FROM GUIDE TO FILE
Turn the artwork into a sew-ready file.
Upload a clean logo, check the front preview, and download DST, PES, JEF, EXP, VP3 or XXX. No black-box stitch files.
Open StitchForge →